This guide will cover the basic configurations of our replacement triple pod front face. Whether you are simply replacing you existing warped face or adding a complete pod to your van, we have you covered!
1. Replacing your existing triple pod face.
2. Converting a double pod to a triple.
3. Adding a triple pod to a vehicle that never had one
1 & 2. Replacing your existing triple pod face or converting from a double pod.
a. Remove the existing inclinometer dial and altimeter lens. Use snips to cut the plastic rivets.
b. Swap the dial and lens over to the new face using the supplied hardware:
c. You can use the supplied green inclinometer dial if yours is damaged or in poor condition. See below:
d. Check out our replacement thermometer for a full OE style conversion from double pod to triple pod.
3. Adding a triple pod to a van that never had one. This assumes that you have no original instruments, dial or lenses.
a. insert the supplied inclinometer dial. The dial cam be moved in and out about ~1mm. This is to accommodate either the OEM inclinometer , or the replacement inclinometer we produce. They are slightly different with respect to this dial.
b. Check out our replacement OEM Replacement Thermometer.
c. 52m Gauge adapters for the thermometer and altimeter location are available here. Aftermarket gauges can be placed in both of these locations in place of the OEM instruments, unless you happen to have those.
`