L300 Rear Window Curtain Tracks

Description

Are you looking for rear curtain tracks for your Delica? We have you covered! These extruded aluminum rails come with sliders, end stops, hardware and rubber retainers. The rubber retainers allow you to lock the last slider in place, holding the outer edge of the curtain.

• The upper rail is 43″ long
• The lower rail is 48″ long.
• Rail is .75″ wide
• Fitment confirmed on high-roof only. Low roof vans do not have enough room to mount tracks without modification
• Sliders can be sewn directly to curtains
• Uses readily available sliders-click here

Installation Instructions (see product images)

Tracks are installed by 7 screws into the rear gate. 3 screws are used for the upper rail, two at either end and one in the middle. 4 screws are used for the lower rail, two at either end and two in the middle. Locate the upper track right above the glass. Locate the lower track under the 3rd brake light. Mark and drill pilot holes using a 2mm (5/64″) drill bit.

The gate has a slight curvature. The rails will bend slightly to accommodate the curvature when the mounting screws are tightened down.

You make/provide your own curtains.