Gauge Pod Installation

For Delica L300 and 52mm or 60mm Gauge

The Gauge Pod will replace the OEM Brake Fluid door located on the right side of the dash (Left side for LHD).

The original spring clip and screw will be used from the OEM Brake Fluid Door

Remove the Original Spring Clip and Screw from the OEM Brake Fluid Door.

Install the Spring Clip onto the gauge pod and test fitment. If the clip does not engage, add a slight clocking angle to the clip. This will help with engagement when clipping the pod into place. Shown below.

Trimming for 60mm Version

For deeper 60mm gauges some minor trimming of the internal dash plastics may be required. About 2mm may need to be trimmed/sanded off of the corner shown below: